When to Use the BIOS Utility
C-2 IBM ThinkPad 310E/310ED: User’s Guide
When to Use the BIOS Utility
The computer is already correctly configured for you. If you make
any changes to the computer or you receive an Equipment
Configuration Error message (error code 246) after you turn on the
computer, you need to run BIOS Utility.
The BIOS Utility has the following functions:
• Change the system date or time
• Set the power-saving modes and timers
• Set, change, or remove a system password
• Change the system boot drive or display device
• Add or remove serial and parallel devices
• Set the video display features
• Change CardBus support mode
To Next Page
Loading...
Need help?
General