EasyManuals Logo

IBM ThinkPad T40 series Service And Troubleshooting Guide

IBM ThinkPad T40 series
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
v Restart: Restart the system.
v BIOS Setup Utility items
v Updating your system BIOS
Note: You can set many of these parameters more easily by using the
ThinkPad Configuration Program.
To start IBM BIOS Setup Utility, do as follows:
1. To protect yourself against accidental loss of data, back up your computer
registry.
2. Remove any diskette from the diskette drive, and then turn off the
computer.
3. Turn on the computer; then, while the To interrupt normal startup, press
the blue Access IBM button message is displayed at the lower-left of the
screen, press the Access IBM button.
4. Select Start setup utility.
If you have set a supervisor password, the IBM BIOS Setup Utility menu
appears after you enter the password. You can start the utility by pressing
Enter instead of entering the supervisor password; however, you cannot
change the parameters that are protected by the supervisor password. For
more information, refer to the on-board help.
5. Using the cursor keys, move to an item you want to change. When the
item you want is highlighted, press Enter. A submenu is displayed.
6. Change the items you wish to change. To change the value of an item, use
the F5 or F6 key. If the item has a submenu, you can display it by pressing
Enter.
7. Press F3 or Esc to exit from the submenu. If you are in a nested submenu,
press Esc repeatedly until you reach the IBM BIOS Setup Utility menu.
Note: If you need to restore the settings to their original state as of the
time of purchase, press F9 key to load the default settings. You can also
select an option in the Restart submenu to load the default settings or
discard the changes.
8. Select Restart; then press Enter. Move the cursor to the option you want
for restarting your computer; then press Enter. Your computer restarts.
Recovering pre-installed software
Your computer hard disk has a hidden, protected area for backups. Contained
within this area is a complete backup of the hard disk as it was shipped from
the factory and a program called the Access IBM Predesktop Area.
Solving computer problems
32
ThinkPad
®
T40 Series Service and Troubleshooting Guide

Table of Contents

Other manuals for IBM ThinkPad T40 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM ThinkPad T40 series and is the answer not in the manual?

IBM ThinkPad T40 series Specifications

General IconGeneral
ProcessorIntel Pentium M (1.3 GHz - 1.7 GHz)
ChipsetIntel 855PM
Hard Drive InterfaceATA-100
Modem56K V.92
Release Year2003
RAM256 MB - 2 GB (DDR SDRAM)
Storage30 GB - 80 GB (HDD)
Display14.1"
GraphicsATI Mobility Radeon 7500 or 9000
Optical DriveDVD-ROM/CD-RW Combo
Operating SystemWindows XP Professional
Weight2.2 kg (4.9 lbs)
BatteryLi-Ion
WirelessIntel PRO/Wireless 2100
Ethernet10/100 Mbps
Ports2 x USB 2.0, VGA, RJ-11, RJ-45, Audio In/Out
Dimensions311 mm x 255 mm x 26.6 mm (12.24" x 10.04" x 1.05")

Related product manuals