EasyManua.ls Logo

IBO Multi IP AUTO - Troubleshooting and Solutions

IBO Multi IP AUTO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
DECLARATION OF CONFORMITY UE/WE (Moduł A):
1.
Submersible pumps: WQ, WQF, WQ PRO, FURIATKA, Furia, KRAKEN, BIG, IP, IP
INOX,Multi IP, Multi IP AUTO, IPC, IPE, IPK, SWQ, SWQ PRO,CTR, ZWQ, MAGNUM, V,
MWQ, KBFU, SN, WQX
2.
PHU Dambat, Gawartowa Wola 38, 05-085 KAMPINOS, POLAND, e-mail: biuro@dambat.pl
3.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.
Pumps form point 1.
5.
Under the Act of 30 August 2002 on the conformity system (Journal of Laws of 2004, No. 204 item
2087) we declare with full responsibility that pumps included in the point 1. to which this declaration
refers to are consistent with the following guidelines of the Council on legal regulations unification in
member states of EC:
MD Nr. 2006/42/WE
Applied standards: EN 809:1998 + A1:2009
LVD Nr. 2014/35/UE
Applied standards: EN 60335-1:2012+AC:2014, EN 60335-2-41:2003+A1:2004+A2:2010
EMC Nr. 2014/30/UE
Applied standards: EN 55014-1:2006+A12009+A2:2011, EN 61000-3-2:2014
Gawartowa Wola 23.01.2015
Adam Jastrzębski
POSSIBLE PROBLEMS AT OPERATION AND THEIR SOLUTION:
Symptom:
Possible cause:
Float switch is in the "off" position
Insufficient quantity of water in the
pumping well for rising of the float
switch into the "on" position
The float switch has caught
against something and cannot
change its position to "on"
The
pum
p not work
does
No electric power supply
The pump is blocked

Related product manuals