IBO BETA 25-60 User Manual

1
Electronic circulator pump operating manual:
BETA 25-60
CAUTION Prior to operation, please read this operating
manual. Due to safety reasons, the use of this equipment
requires a thorough knowledge of this operating manual.
CAUTION This operating manual is the primary basis for the
equipment’s sale contract. Non-observance of the recommendations
listed in this manual will result in a breach of this contract and will
invalidate any claims made by the user relating to the equipment’s failure
resulting from its inappropriate use.
CAUTION Non-observance of recommendations listed in this
operating manual may result in personal injuries or damage to
units where the equipment is installed, the environment or the
pump itself.
CAUTION! Children and persons with reduced physical,
sensory or mental capabilities must not use this equipment;
also persons with no experience or knowledge of the product
unless under the supervision or in accordance with the equipment’s
operating manual and instructed by a person responsible for their safety.
Children must not play with this equipment.

IBO BETA 25-60 Specifications

General

Brand	IBO
Model	BETA 25-60
Category	Water Pump
Language	English

Summary

Safety and Warnings

General Safety Precautions

Essential safety warnings and cautions for operating the pump, including manual understanding and danger alerts.

Application Requirements

Operating Conditions and Limitations

Specifies intended use, temperature, pressure, and water quality constraints for the pump.

Installation

Installation Procedures

Instructions for mounting the pump, including pipework preparation and shaft orientation.

Electrical Connection

Connection Requirements

Guidelines for connecting the pump to the power supply, including earthing and breaker needs.

Pump Operation Control

Control Panel and Modes

Overview of the control panel, display elements, and operating mode selection process.

Recommended Settings

Heating System Configurations

Guidance on selecting optimal operating modes for different central heating system types.

Advanced Operation Features

Night Mode Functionality

Details on using and principles of the night mode for energy saving.

Startup and Venting

Steps for initial pump startup, including venting and system purging.

Operating Limits and Handling

Inlet Pressure and Temperature Limits

Critical parameters for medium pressure and temperature to ensure correct pump operation.

Storage, Transport, and Disposal

Guidelines for handling, moving, and responsibly disposing of the pump.

Troubleshooting and Compliance

Fault Identification and Solutions

Common pump issues, their causes, and recommended corrective actions.

CE Declaration

Manufacturer's declaration of conformity with relevant European directives.