EN
16
Focus on the following three functions：
Sliding Roof Basic Setting
After the maintenance of the skylight, it is necessary to use the basic
setting to re match and learn the stop point value of the automatic
skylight at each position.
To Preform Sliding Roof Basic Setting:
1) Sliding roof basic setting is required after the maintenance of
the sunroof，access basic settings，select Sliding Roof Basic
Setting.
2) The basic settings of the sliding roof is closed. Press the help
button to display help information.
3) Press the [Help] button to display a prompt message as above.
4) Then press the [ON] button to rematch and learn the stop point
To Next Page
Loading...
