iCarsoft CR MAX User Manual

I
Trademarks
iCarsoft, CR Max and CR MAX BT are trademarks of iCarsoft
Intelligent Technology Corp., Ltd., registered in the United States
and other countries. All other marks are trademarks or registered
trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise without the prior
written permission of iCarsoft.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are
based on the latest information available at the time of printing.
iCarsoft reserves the right to make changes at any time without
notice. While information of this manual has been carefully checked
for accuracy, no guarantee is given for the completeness and
correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
iCarsoft will not be liable for any direct, special, incidental, indirect
damages or any economic consequential damages (including the
loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual
carefully, paying extra attention to the safety warnings and
precautions.
For Services and Support
Http://www.icarsoft.us
Http://www.icarsoft.com
Support@icarsoft.us
For technical assistance in all other markets, please contact your
local selling agent.

iCarsoft CR MAX Specifications

General

RAM	2 GB
Storage	16GB
Connectivity	Wi-Fi, Bluetooth
Update Method	Wi-Fi
Operating System	Android
Processor	Quad-core
OBDII Functions	Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Information
Special Functions	Oil Reset, EPB, BMS, SAS, DPF, TPMS, ABS
Supported Protocols	CAN, ISO9141, KWP2000, J1850 VPW, J1850 PWM
Compatibility	Over 40 Vehicle Makes
Functions	Full system diagnostics
Languages	English, Spanish, French, German

Summary

Safety Information

Safety Messages

Explains hazard levels and signal words used for safety messages to prevent personal injury and equipment damage.

3 Getting Started

3.1 Powering Up

3.1.1 Application Buttons

3.1.2 Locator and Navigation Buttons

3.2 Powering Down

4 Diagnostics

4.1 Getting Started

Outlines the initial steps and requirements for starting diagnostic operations with the CR MAX tool.

4.1.1 Vehicle Menu Layout

4.2 Vehicle Identification

Presents the four methods supported by the CR MAX system for identifying a vehicle for diagnostics.

4.2.1 Auto VIN Scan

Explains the VIN-based Auto VIN Scan function for quick vehicle identification and diagnostics.

4.2.2 Manual VIN Input

Guides users on how to manually enter the vehicle's VIN for identification when automatic scanning is not supported.

4.2.3 Smart Scan

Describes the Smart Scan function for scanning vehicle identification numbers when automatic scanning is not performed.

4.2.4 Manual Selection

Details how to manually select a vehicle through a series of menu options when VIN is not retrievable.

4.3 Navigation

4.3.1 Diagnostics Screen Layout

4.4 Diagnosis

Explains how the Diagnostics application links to vehicle ECUs for various diagnostic functions.

4.4.1 Smart Scan

Details the Smart Scan function for comprehensive ECU scanning to locate and retrieve DTCs.

4.4.2 Manual

Guides users to manually select a required control system for testing through a series of choices.

4.5 Generic OBD II Operations

Explains the fast-access option for OBD II/EOBD vehicle diagnosis, including DTC checks and emissions testing.

4.5.1 General Procedure

Outlines the general procedure to access OBD II/EOBD diagnostic functions and establish communication.

4.5.2 Function Descriptions

Describes various functions available within OBD II diagnostic options like Read Codes and Erase Codes.

4.6 Exiting Diagnostics

Provides instructions on how to properly exit the diagnostic application and disconnect from the vehicle.

5 Service Operations

5.1 Brake Bleed

Explains the procedure for bleeding the brake system, typically after ABS component replacement.

5.2 Oil Reset Service

Guides on performing an oil reset for the Engine Oil Life system to recalculate the optimal interval.

5.3 Electronic Parking Brake (EPB) Service

Details the maintenance of the electronic parking brake system, including pad replacement and system activation.

5.3.1 EPB Safety

5.3.2 EMF Star-up

5.4 Electronic Throttle Control

Guides on relearning the throttle value control after clearing or replacing the throttle value.

5.5 Injector

Describes how to perform injector coding and matching after replacement for accurate fuel injection control.

5.6 Steering Angle Sensor (SAS) Service

Explains the calibration process for the steering angle sensor to store the straight-ahead position.

5.6.1 Steering Angle Sensor Calibration

Details the steps for performing steering angle sensor calibration and clearing related records.

5.7 BMS

Covers Battery Management System functions like evaluating charge state and registering battery replacement.

5.7.1 Register Battery Replacement

5.8 DPF Service

5.8.1 Starting Basic Inspection Quantity

5.8.2 Injection Rate

5.8.3 Injector Rate Adjustment

5.8.4 Particle Filter Regeneration

5.8.5 Particle Filter Test

5.9 AFS Head Lamp

5.10 Air Suspension

5.11 TPMS programming service

5.12 Gearbox Reset

5.13 Air conditioning service

5.14 Air Filter Self-learning process after replacing the air filter

5.15 Fuel Pump activation function

7 Upgrade

9 Settings

9.1 Unit

9.2 Language

9.8 System Settings

9.9 Click To Restore Factory Settings

11 Fault Code

16 Maintenance and Service

16.1 Maintenance Instructions

16.2 Troubleshooting Checklist

Offers solutions for common issues like tablet not working, short battery life, or charging problems.

16.3 About Battery Usage

16.4 Service Procedures

18 Warranty

18.1 Limited One Year Warranty

Details the limited one-year warranty for the diagnostic device, including coverage and exclusions.