EasyManua.ls Logo

ICC EXCEL - User Manual

ICC EXCEL
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EXCEL
FACTORY BUILT CHIMNEY
INSTALLATION AND MAINTENANCE
INSTRUCTIONS
A MAJOR CAUSE OF CHIMNEY RELATED FIRES IS FAILURE TO
MAINTAIN REQUIRED CLEARANCES (AIR SPACE) TO
COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT
THIS CHIMNEY BE INSTALLED ONLY IN ACCORDANCE WITH THESE
INSTRUCTIONS.
This chimney is intended for use with solid, liquid and gas fired appliances,
including wood fired stoves, fireplaces and furnaces.
Maximum continuous flue gas temperature:
650°C
1200°F
Brief forced firing:
925°C
1700°F
Tested to: (3 X 30 minutes)
1150°C
2100°F
The chimney should be the size recommended by the appliance
manufacturer.
Use only ICC Model EXCEL components. Failure to do so will void the
certification and warranty of the product.
Keep these installation and operating instructions in a safe location for
future reference.
Contact local building or fire officials about restrictions and installation
inspection in your area.
EXCEL has been tested and listed to the ULC S-629
chimney standard by Intertek Testing Services
Listing # 5965
ICC INDUSTRIAL CHIMNEY COMPANY INC.
400 J.F. Kennedy, St. Jerome
Quebec, Canada, J7Y 4B7
Tel.: (450) 565-6336
Fax: (450) 565-6519
http://www.icc-rsf.com
FOR CANADA ONLY
XLCND-II_2010-02
Question and Answer IconNeed help?

Do you have a question about the ICC EXCEL and is the answer not in the manual?

Summary

EXCEL Technical Specifications

Materials and Dimensions

Details on exterior/interior materials, diameters, weight, and clearances.

Support Capacity and Rough Openings

Lists maximum support capacities and required rough opening sizes.

Creosote and Soot Management

Creosote Formation and Fire Risk

Explains the formation of creosote and its ignition risk in chimneys.

Coal Burning Safety Precautions

Recommendations for safe coal burning to protect the chimney from corrosion.

Wood Stove Installation and Use Guidelines

Guidance for installing and operating wood stoves with the chimney.

Operation and Maintenance

Chimney Inspection and Cleaning Schedule

Procedures for regular chimney inspection and cleaning by a qualified sweep.

Chimney Fire Response Procedures

Step-by-step instructions on how to handle a chimney fire safely.

Installation Notes

General Installation Rules and Clearances

Important considerations and rules for chimney installation, including clearances.

Chimney Height and Enclosure Requirements

Guidance on chimney height above roof and enclosure specifications.

Appliance and Height Requirements

Factory-Built Fireplace Compatibility

Information on using the chimney with factory-built fireplaces.

Oil and Gas Appliance Venting

Guidance for venting oil and gas burning appliances.

Chimney Height Requirements

Details and diagrams for minimum required chimney height.

Installation Instructions

Round and Square Support Installation

Guides for installing round and square chimney supports.

Straight Chimney Installation

Instructions for installing straight chimney sections without offsets.

Offset Chimney Installation

Steps for installing chimney sections with offsets using insulated elbows.

Attic Installation Considerations

Guidance for chimney installation in enclosed or unenclosed attics.

Roof Flashing and Rain Cap Installation

Procedures for installing roof flashing and fitting the rain cap.

Cathedral Ceiling Installation

Specific instructions for installing chimney in cathedral ceilings.

Support Extensions

Use and installation of support extensions for varying depths.

Universal and Roof Support Bands

How to assemble universal and roof support bands.

Roof Support (ESR) Installation

Instructions for installing the roof support system.

Offset Support (EOS) Installation

Steps for installing the offset support.

Wall Support (EWS) Installation

How to install wall supports to secure the chimney.

Wall Radiation Shield (EWRS)

Information on installing wall radiation shields.

Through Wall Installation

Procedures for passing the chimney through walls.

Wall Channel Installation

Steps for installing a wall channel for support.

Roof Brace (ERB) Installation

How to install a roof brace for chimney stability.

Adjustable Length (ELA18) Installation

Using adjustable lengths for precise chimney fit.

Anchor Plate (EAP) Use

How to use the anchor plate with masonry fireplaces.

Radiation Shields (ERS & ERSA)

When and how to install radiation shields.

Rain Cap Base (ERCB)

Use of the rain cap base when a rain cap is not used.

Universal Storm Collar (ESC) Installation

Installation instructions for the universal storm collar.

Snow Barrier (ESW) Installation

Securing the chimney against snow loads with a snow wedge.

Round Support (ERDS) Installation

Specific steps for installing the round support.

Extended Wall Support (EWSE)

Installing extended wall supports for increased height.

Limited Lifetime Warranty

Warranty Coverage and Exclusions

Details on what the warranty covers and does not cover.

Claim Procedure and Limitations

Steps for making a warranty claim and limitations.

Product Design and Application Limits

Information on intended use, operating temperatures, and voiding conditions.

ICC EXCEL Specifications

General IconGeneral
BrandICC
ModelEXCEL
CategoryFireplace Accessories
LanguageEnglish