What to do if brush motor will not operate on Ice Scrubber?
If the brush motor on your Ice Scrubber isn't working, check these things: ensure the scrub head is lowered to the floor. If not, lower the scrub head. If the battery meter lockout is activated, recharge the batteries. Also, check the brush motor circuit breaker and reset it if it's tripped.
Why is there little or no solution flow in my Ice Scrubber?
If your Ice Scrubber isn't dispensing enough solution, check the following: ensure the ball valve is fully open. If it isn't, turn on the ball valve. Adjust the solution control flow knob. Clean the solution tank filter or flush out the solution hose if they're clogged. If the solution solenoid valve is clogged, remove the valve and clean it.
Key safety rules for operating and servicing the automatic scrubber.
Diagram and list identifying major parts of the automatic scrubber.
Identifies indicators, buttons, and display elements on the control panel.
Covers uncrating, battery connection, and attaching scrub head accessories.
Procedure for filling the clean water tank with cleaning solution.
Steps for starting, driving, and stopping the automatic scrubber.
Instructions for draining tanks and charging the machine's batteries.
General guidance on performing preventative maintenance on the machine.
Routine cleaning, checks, and periodic maintenance tasks.
Covers Orbital Head, Motor, Battery, and Machine Storage procedures.
Explains fault messages, their causes, and recommended solutions.
Lists common problems and their corresponding solutions for the machine.
Details dimensions, weight, capacities, and performance metrics.
To Next Page
General
