15
The DC Voltage is below the protection settings
and the battery protection mode is activated.
E1 Error Code
E1 Solutions
1. In case of using in the car, turn the car ignition
on and start the refrigerator again;
2. In the case of using the AC adapter to
connect the electricity at home, you can adjust
the battery protection to medium or low mode.
If it still does not start after adjusting the mode,
then the adapter is faulty and needs to be
replaced with a new one.
The cooling fan is over-loaded with more than
1A of current.
E2 Error Code
To Next Page
Loading...
