16
If the fan does not start but the compressor does,
this is a short-circuited fan. You can x the error
code by replacing the fan.
E2 Solutions
Repeated switching of the machine or a faulty
input voltage causes this motor start error.The
pressure dierence in the refrigeration system is
too high.
E3 Error Code
1. Make sure to turn o the machine and wait
for 5 minutes before turning it on again. If the
compressor starts and then stops a few seconds
later, it is an E1 fault, and you need to refer to the
above E1 troubleshooting method for
troubleshooting;
E3 Solutions
To Next Page
Loading...
