MANUAL for KG30 - KG50 SUpreMe
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 14
REPAIR AND WARRANTY
Repair
The repair/replacement of the following parts can
bemadebytheowner’squaliedpersonnel:
• Signalcableplugsonthemachine,blastinghose
and blasting gun.
• Blastinghosecouplingsonthemachine,hose
and gun.
• Electricityandcompressedairsocketsonthe
rear of the machine.
When making repairs/replacements, use only
original IceTech spare parts.
Terms of Warranty
In order to comply with the terms of the warranty,
and for safety reasons, repairs other than those
stated above require relevant tools and equip-
ment and therefore must always be made either by
anIceTechtechnicianorbytheowner’squalied
personnel who have been trained by IceTech in the
repair and maintenance of IceTech dry ice blasting
machines and accessories. Beyond the necessary
knowledge, the person concerned must have appro-
priate tools and equipment, as well as the auxiliary
materials required, at his disposal.
The liability of the manufacturer under the terms
of the CE endorsement in regards to safety may
become invalid:
• If repairs are made using non-IceTech
spare parts.
• If repairs are made by unqualied personnel.
• If repairs are unsatisfactory due to lack of
relevant tools and equipment.
In such cases, the liability of the manufacturer will
besolelyconnedtoanymanufacturingfaults/er-
rors made prior to the machine being delivered and
before repairs/replacements have been made.
To Next Page
Loading...
Need help?
General
