MANUAL for KG30 - KG50 SUpreMe
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 6
1 Handle on hopper lid.
2 Hopper lid.
Maintained in open position
by pneumatic struts.
3 Handle for maneuvering
the machine.
4 Control panel.
5 Connection for blasting hose.
6 Dry ice dosing unit.
Doses dry ice into the
blasting air stream.
“ The equipment is designed to meet
the wishes of users. It is light, mobile,
reliable and easy to operate. ”
MACHINE ILLUSTRATIONS
7 Machine wheel brakes.
Must remain applied when
the machine is in operation.
8 Pressure control.
Adjusts the blasting pressure
to the value set on the
control panel.
9 Main valve for blasting air
stream. If the machine is
ready for operation and the
blasting parameters required
have been set, this valve
opens for the blasting air
stream, every time the trig-
ger switch on the blasting
gun is activated. As soon as
the trigger switch on the
blasting gun is released, the
valve cuts off the air stream.
10 Static Ground Cable
1
2
3
3
3
3
4
6
8
9
5
7
10
To Next Page
Loading...
Need help?
General
