MANUAL for KG30 - KG50 SUpreMe
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 7
“ In many cases cleaning is possible
without dismantling. The frequency of
production stops is therefore often
drastically reduced. ”
A Compressed-air-driven
vibrator on the hopper.
1 Hopper.
2 Control box.
3 Filter rate controller for vibra-
tor and main valve (to be set
to 4.5-5.0 bar / 65-73 psi).
4 Compressed air supply.
5 Main power supply.
MACHINE ILLUSTRATIONS
6 Signal cable from blasting
hose. Transfers signals from
the trigger switch on the
blasting gun to the machine
control.
7 Cable holder.
8 Rating plate.
9 Cabinet handles are for
maneuvering the machine
manually on its wheels. Do
NOT use them as lifting
hooks. Use a forklift truck or
a crane instead!
10 Static Ground Cable
Important!
When lifting with a forklift
truck, make sure that the forks
are inserted all the way under
the machine frame itself.
When using a crane for lifting,
a yoke with straps under the
cabinet frame must be used.
Ensure that wheels and wheel
brakes do not become damaged.
4 5
7
9
9
10
1
2
A
3
10
6
8
9
To Next Page
Loading...
Need help?
General
