ICM Controls ICM450 User Manual

2
ICM450 Wiring Diagrams
2-Pole Contactor 3-Pole Contactor
LINE
3
LINE
1
LINE
2
LOAD
1
LOAD
2
LOAD
3
Control
Voltage
L01
L02
L03
L0AD
LI1
LI3
LI2
LINE
3
LINE
1
LINE
2
LOAD
1
LOAD
2
LOAD
3
Control
Voltage
L01
L02
L03
L0AD
LI1
LI2
LI3
1. Press the green SETUP button to enter Setup mode. Setup LED will light.
2. Use the and arrows to change user parameters.
3. Scroll through setup by pressing and releasing the SETUP button.
4. When the last parameter has been set, the phase average will be
displayed and the Setup LED will automatically turn OFF.
Setting the Parameters
Button Functions
Press arrows to scroll through
and select user parameter
settings in Setup mode.
HOLD down for fast edit.
Press to enter
Setup mode
and select user
parameters.
Hold for
voltage display
a b, b c, a c
(simultaneously).
Press to read faults.
Hold for 5 seconds
to clear faults and
reset memory.
* Thermostat, pressure switch, etc. * Thermostat, pressure switch, etc.

ICM Controls ICM450 Specifications

General

Brand	ICM Controls
Model	ICM450
Category	Measuring Instruments
Language	English