Antenna terminal
Mounting plate
Mounting plate
Ground terminal
340 mm; 13.4 in
230 mm; 9.1 in
80 mm
; 3.1 in
91.5 mm
; 3.6 in
Water drain screw
n Specifications
n Unit description
• Frequency coverage : 1.6–30 MHz (with 7 m; 23.0 ft or longer antenna element)
• Power supply requirement : 13.6 V DC (supplied from the HF transceiver)
• Current drain : Maximum 2 A
• Operating temperature range : –30°C to +60°C; –22˚F to +140˚F
• Weight (approximately) : AT-130 2.5 kg; 5.5 lb
AT-130E 2.7 kg; 6.0 lb
• Antenna connector : SO-239 (50 Ω)
• Maximum Input power : 150 W (PEP) 100 W (continuous)
• Automatic tuning time : Approximately 2 to 3 seconds (general condition) Maximum 15 seconds
Approximately 1 second (re-tuning for a memorized frequency)
• Automatic tuning accuracy : SWR 2.0:1 (after tuning, except for multiples of
1
⁄2 λ)
All stated specifications are subject to change without notice or obligation.
5
10
UNIT DESCRIPTION AND SPECIFICATIONS
To Next Page
Loading...
