Need help?Do you have a question about the Icom AT-140 and is the answer not in the manual?
General| Compatibility | IC-M802 |
|---|---|
| Product color | Gray |
| Frequency range | 1.6 - 30 MHz |
| Brand compatibility | ICOM |
| Quantity | 1 |
Detects input power from transceiver for attenuator handling.
Detects reflected power from antenna system for voltage detection.
Detects reactance components and provides pure resistance.
Uses attenuator to reduce transmit power for matching.
Controls antenna matching network via CPU and stored program.
Detects antenna current (Europe version only).
Adjusts phase detector circuit using R56.
Adjusts impedance detector circuit using C7.
Verifies forward detector circuit performance.
Verifies SWR detector circuit performance.
Lists mechanical components for the chassis.
Lists mechanical components for the tuner unit.
Lists additional mechanical accessories.
Shows diagrams and types of transistors and FETs used.
Shows diagrams and types of diodes used.
Diagram showing component placement on the tuner unit board.
Diagram showing component placement on the manual unit board.
To Next Page
