Icom IC-02N User Manual

Procedure for removing the battery case from the transceiver.

Steps for installing AA dry cell batteries into the battery holder.

Guide to attaching the battery case back to the transceiver.

Instructions for attaching the rainproof cap, flexible antenna, belt clip, and handstrap.

Controls secondary functions when pushed and held.

Push to transmit, release to receive.

Button for releasing the battery pack for removal.

Port for connecting the supplied antenna.

Jack for connecting external DC power sources.

Ports for connecting optional microphones or headsets.

Controls the display lighting ON and OFF.

Selects high or low output power.

Turns power ON/OFF and adjusts audio level.

Adjusts the squelch threshold for noise muting.

Details primary and secondary functions of each keyboard key.

Explains keys 1-9, 0, #, *, CL/S-STOP, A, B, C, D and their operations.

Appears during priority watch operation.

Appears during programmed or memory scan.

Indicates when the transceiver is transmitting.

Shows the selected memory channel or call channel.

Appears when the lock function is activated.

Appears when the dry cell battery is low.

Displays the current operating frequency.

Shows signal strength or output power.

How to input frequencies using the numeric keypad.

How to adjust frequency using the / keys.

Procedure for selecting the desired frequency tuning step.

Prevents accidental frequency changes and unintended function access.

Controls the display lighting for night operation.

Enables or disables beep tones for key entry confirmation.

Explains the two operating modes: VFO and Memory.

Steps for setting up and performing reception.

Steps for setting up and performing transmission.

How to select between high and low output power.

Indicator for low battery and replacement advice.

Details special functions for memory channels 3, 4, 5, and 6.

How to store and recall a frequently used frequency.

Procedure for programming frequencies into memory channels.

How to recall stored frequencies from memory channels.

Overview of available scan types: Programmed and Memory scan.

How to set up and start a scan between two specified frequencies.

How to set up and start scanning through memory channels.

How to monitor a priority channel while operating on another frequency.

Addresses issues like no power, no sound, and transmission problems.

Details on the lithium backup battery for memory retention.

Procedure for resetting the CPU in case of malfunction.

Covers frequency coverage, mode, stability, current drain, and dimensions.

Details on output power, deviation, and emissions.

Covers receive system, intermediate frequencies, sensitivity, and selectivity.

Information on various Icom chargers for battery packs.

Table detailing battery pack models, capacities, and charging times.

Lists optional items like speaker-microphones, headsets, and mounting brackets.