Need help?Do you have a question about the Icom IC-03AT and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-03AT |
| Category | Transceiver |
| Language | English |
Stores frequency, duplex, and tone information for convenience.
Monitors memory channels or programmed frequency ranges with auto-stop.
Instructions for installing and recharging the IC-BP3 battery pack.
Guidance on connecting the flexible rubber antenna and external antennas.
Steps to turn on the transceiver and set up for receiving audio.
Steps for selecting output power and simplex/duplex modes for transmitting.
How to transmit, use the RF indicator, and set subaudible tone frequency.
Details primary and secondary functions of various keys on the transceiver.
Explains additional primary and secondary key functions and their page references.
Lists functions available in Dial Mode, including setting frequency and duplex.
Lists functions available in Memory Mode, including recalling and scanning.
Covers Call Channel, Memory Scan, Priority, and Lock functions common to both modes.
Procedure for entering desired frequencies using the numerical keypad.
Instructions for setting transmit offset frequency and duplex modes.
Explains how to memorize frequency, duplex, and tone into memory channels.
Steps to recall memorized frequencies and settings from memory channels.
How to recall and clear the Call Channel frequency stored in memory channel 3.
Procedure for monitoring a priority channel while operating on another frequency.
To Next Page
