Icom IC-207H - Page 20

estoy
cae 3 SETTING A FREQUENCY
@ Preparation
© Turning power ON/OFF
Push [PWR] for 1 sec. to turn power ON or OFF.
&
@~ — Push [PWR] for 1 sec.
oS
edi )O-OO-.O
© Operating band
The IC-207H can receive/transmit on the 144 MHz and
430(440) MHz bands, or receive only on the avionics band
(USA version only).
Push [BAND] one or more times to select the desired operat-
ing band.
¢ The frequency changes to indicate the selected band.
¢ The operating band cannot be changed unless you are in VFO
mode (see right).
( \ Push [BAND] one or more times to select the de-
BAND sired operating band.
© VFO and memory modes
The transceiver has 2 normal operating modes: VFO m
and memory mode.
Push [V/MHz] to select VFO mode when the transceive
not in VFO mode.
¢ lf VFO mode is already selected, the digits below 100 kHz di
pear. In this case, push [V/MHz] again (or push twice dependin
version).
VFO mode is selected. Appears when memory mo
is selected.
(| Push [VFO] to select VFO mode.
VFO
Note that in this manual, sections beginning with
microphone icon (as at left) designate operation \
the y 98 Legge NS