Icom IC-207H - Page 21

i Lock functions
) prevent accidental frequency changes and unnecessary
nction access, use the lock function. The transceiver has 2
ferent lock functions.
Frequency lock
lis function locks the tuning dial and switches electronically
id can be used together with the microphone lock function.
ish and hold until “L” appears in the memory chan-
| readout to activate the function.
© cancel the function, push and hold until “L” disappears.
PTT], [MONI], [VOL] and [SQL] can be used while the frequency
»ck function is in use. Also, TONE-1, TONE-2, DTMF tones or
JTMF memory contents can be transmitted from the microphone.
“L” appears while the frequency
lock function is in use.
f \ Push and hold [(VFO)LOCK] for 1 sec. to toggle
LOCK the function ON and OFF.
J
SETTING A FREQUENCY 3
© Microphone keypad lock
This function locks the microphone keypad.
(H) Push [FUNC] then [®16 KEYLOCK] to toggle
16 KEY LOCK the microphone keypad lock function ON and
ere
e [PTT] and the 7 keys on the upper half of the mi-
crophone can be used.
¢ All switches on the transceiver can be used.
¢ The keypad lock function is released when the
power is turned OFF then ON again.
ENGLISH