Icom IC-207H - Page 28

4 BASIC OPERATION
@ Monitor function
This function is used to listen to weak signals without disturb-
ing the squelch setting or to open the operating band’s
squelch manually even when mute functions such as tone
squelch are in use.
Push [MONI] to open the operating band’s squelch.
e Push [MONI] again to cancel the function.
e While duplex is ON for repeater operation, the transmitting fre-
quency can be monitored with [MONI].
= Push [BAND] to change bands, if necessary.
MONI Push [OMONI] to open the operating band’s
2 squelch.
¢ Push [OMONI] again to cancel the function.
@ Audio mute function
(| This function mutes the operating band’s audio
MUTE without disturbing the volume setting.
\O)
Push [FUNC] then [OMUTE] to mute the operating band’s
audio signals
e “MUTE” appears.
Push [@®CLR] (or any other key) to cancel the function.
e “MUTE” disappears.
M@ Avionics band receive wsa versionon
AM mode can be selected over the range of 118.000 t
135.995 MHz for reception of avionics-related broadcasts.
@ Push [BAND] one or more times to select the aviatio
band.
@ Push and hold [BAND] to toggle between AM and FI
modes.
e Mode selection cannot be performed via the microphone.
—, gs
He ‘
Hog gimmie
an oe
ri
Us pe
bar
=!
.
Appears when AM mode is selected.
VY CONVENIENT
The tuning steps for the avionics band are available sep<
rately from those for other ranges.