Icom IC-207H - Page 30

eS Se
4 BASIC OPERATION
The microphone can select the desired output
power directly.
(1 Push [BAND] to select the desired band, if nec-
essary.
Push [®HIGH] for high output power; [©MID] for
mid-high output power; [O©LOW] for low output
power.
e“MID-LO” output power CANNOT be selected via
these microphone keys, however, the default setting
for [F-1] is output power selection—“MID-LO” output
power CAN be selected using [F-1], in this case.
¢ The output power CANNOT be changed via the mi-
crophone while transmitting.
|
i
\
H One-touch PTT function
PTT-M
The PTT switch can be operated as a Badueus
PTT switch (each push toggles transmit/receive
Using this function, you can transmit without pust
ing and holding the PTT switch.
(
To prevent accidental, continuous transmission
with the one-touch PTT function, the transceive
has a time-out timer. See p. 59 for details. :
OG] Push [FUNC] then [©PTT-M] to turn the one-touch PT,
function ON.
¢ The activity indicator lights green.
Push [PTT] to transmit and push again to receive.
¢ Two beeps sound when transmission is started and a long bee
sounds when returning to receive. |
¢ “Gi®’ flashes while transmitting with the one-touch PTT fury
tion.
Push [FUNC] then [@PTT-M] to turn the one-touch PT
function OFF.
¢ The activity indicator goes out.