Icom IC-207H - 11-2 MAIN UNIT

6 MEMORY OPERATION
M@ Memory clearing
Contents of programmed memories can be cleared (blanked), Y NOTE:
if desired. Z Be careful—the contents of cleared memories CANNO
Y be recalled.
® Push [S.MW] momentarily. Yj ¢ Scan edge channels 1A/1b cannot be cleared.
@ Select the memory channel to be cleared with the tuning
dial. Memory clearing may not be performed from th
@® Push [S.MW] briefly, then a second time for 1 sec. @ microphone.
¢ 3 beeps sound, then the frequency is cleared.
e “@p” flashes continuously.
¢ Scan edges and call channels cannot be cleared.
@ Push any switch to stop the flashing.
[EXAMPLE]: Clearing memory channel 20.
Push Mw Y\
= Cee momentarily Molate
A
Push
MW
?
MW
)
;
a:
Opsiw
briefly,
then
push
Qi
again
for
1
sec.
ush
any
switch
HI ww1157
-o