Icom IC-207H - Page 45

NO
Ee
nn
ee
ee
ee
Meee
)
SCAN
OPERATION
9
ees
)
a
Scan
types
=
7)
Pei searches for transmitted signals automatically and Each band has 3 scan types and 5 resume conditions to suit 5
ynkes it easier to locate new stations for contact or listening your needs. af
\rposes.
PROGRAMMED SCAN Repeatedly scans _bet-
(p. 42) ween two user-
programmed frequencies.
Band Scan edges Used for checking for fre-
oe ea a gta quencies within a speci-
HK-+-——++H fied range such as repeat-
Seana er output frequencies, etc.
3 pairs of scan edges are
available.
Repeatedly scans all fre-
quencies over the entire
) 3 band. Used as the simplest
scan without any prelimi-
nary settings necessary.
aie
-
mmeee = -~
SCAN RESUME CONDITION’ 5 resume conditions are
(p. 46) available: 3 timer scans,
Me. es ee pause scan and empty
a signal ans
scan. When receiving a
Pause : 6
scan V/ = signal, pause scan pauses
Timer 4p. YWWWWWWrr until the signal disappears;
eT an £ timer scans pause for 5,
Pausing 2 sec. 10 or 15 sec. Empty
pause scan pauses until a
signal appears.
Repeatedly scans memory
channels except for skip
channels. Used for often-
called channels and
bypassing normally busy
channels such as repeater
frequencies.