Icom IC-207H - Page 58

12 POCKET BEEP AND TONE SQUELCH
@ Tone squelch operation
The tone squelch opens only when receiving a signal with the
same pre-programmed subaudible tone.
@ Push [BAND] to select a band, if necessary.
@ Set the operating frequency.
@ Program the subaudible tone frequency in set mode.
¢ See p. 26 for programming details.
@ Push [TONE] one or more times until “T SQL” appears in
the function display.
© When the received signal includes the correct tone, the
squelch opens and the signal can be heard.
e When the received signal includes an incorrect tone, the squelch
does not open. However, the S/RF indicator shows the received
signal strength.
¢ To open the squelch manually, push [MONI].
© Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).
® To cancel the tone squelch, push [TONE].
¢ “T SQL’ disappears from the function display.
41] Push [BAND] to select the desired band, if ne
essary.
Set the operating frequency.
Program the subaudible tone frequency in s
mode. |
¢ See p. 26 for programming details.
Push [FUNC] then [®T SQL] to turn the tot
squelch ON. ,
[5]When the received signal includes the corre
tone, the squelch opens and the signal can |
heard.
e When the received signal includes and incorre
tone, the squelch does not open. However, the S/F
indicator shows the received signal strength.
¢ To open the squelch manually, push [OMONI].
[6]Operate the transceiver in the normal w:
(push [PTT] to transmit; release [PTT] to r
ceive). :
(7] To cancel the tone squelch, push [FUNC] the
[OT-OFF].