Icom IC-207H - Page 79

) MAINTENANCE 15
50me memory channels
sannot be selected via the
nicrophone keypad.
POSSIBLECAUSE
|.
e The input channel number has not yet been pro-
grammed.
SOLUTION.
¢ Rotate the tuning dial to check whether the
channel has been programmed or not.
scan does not operate. ¢ Squelch is open. ¢ Set the squelch to the threshold point.
¢ The selected scan edge memory channels (e.g. | * Reset the scan edges.
1 A and 1b) have the same frequencies (for pro-
grammed scan).
¢ Only 1 memory channel is programmed or other
channels are set as skip channels. memory skip function in the desired channels.
e Priority watch is activated. e Turn the function OFF.
¢ Time-out timer is activated. e Set the timer to OFF.
¢ One-touch PTT function is activated. ¢ Turn the function OFF. p. 23
¢ The CPU is malfunctioning. e Reset the CPU. a
Transmission is automati-
sally cut off.
Transmission continues
sven when the PTT is re-
eased.
The function display shows
2rroneous information.
ENGLISH