Icom IC-410PRO - Rear Panel Connection; Mounting the Transceiver

iv
TABLE OF CONTENTS
IMPORTANT ..........................................................................i
GENERAL INFORMATION ....................................................i
EXPLICIT DEFINITIONS ...................................................... ii
PRECAUTIONS .................................................................... ii
SUPPLIED ACCESSORIES ................................................ iv
1. PANEL DESCRIPTION ................................................1–3
■ Front panel ................................................................... 1
■ Function display ...........................................................3
2. BASIC OPERATION ........................................................4
■ Receiving and Transmitting ..........................................4
3. SET MODE .......................................................................5
■ Using the Set mode .....................................................5
■ Set mode item list ........................................................5
4. OPTIONS .........................................................................6
5. TROUBLESHOOTING ..................................................... 7
6. WARRANTY AND REGISTRATION ..........................8–11
INDEX.................................................................................12
SUPPLIED ACCESSORIES
Microphone
Microphone hanger
and screw set
Microphone
hanger cable
DC power cable
Flat washers
Spring washers
Bracket bolts
Mounting screws
Self-tapping screws
Nuts
Mounting bracket
Function name
stickers*
* Used for labelling the programmable function keys according to
their assigned functions.