Icom IC-7000 Manual

Alternate method to enable TV mode
Contact author: Dave
My IC-7000 has an additional set of solder pads next to TV diode D2154.
The solder pads are in the shape of half circles connected by a thin printed trace. The thin
pc trace can be easily cut with an exacto type knife.
If present this method eliminates unsoldering the small surface mount diode, furthermore,
the TV function can be easily disabled by bridging the half circles with solder.

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm