Why doesn't programmed scan stop on my Icom Transceiver?
If the programmed scan on your Icom Transceiver does not stop, it may be because the squelch is open. Set the squelch to the threshold position.
Why doesn't programmed scan start on my Icom IC-7000?
If the programmed scan on your Icom Transceiver does not start, it is possible that the same frequencies have been programmed in scan edge memory channels. Program different frequencies into scan edge memory channels.
Why won't the memory scan start on my Icom IC-7000 Transceiver?
If the memory scan on your Icom Transceiver does not start, ensure that you have programmed 2 or more memory channels.
General| Input voltage | 13.8 V |
|---|---|
| Microphone included | Yes |
| Product type | Portable CB radio |
| Product color | Black |
| Housing material | - |
| Frequency range | 0.5 - 455000 MHz |
| Channels quantity | 503 channels |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 167 mm |
| Height | 58 mm |
To Next Page
