Icom IC-7000 - Set Mode; Set Mode Description

13
122
SET MODE
Set mode is used for programming infrequently
changed values or conditions of functions. This trans-
ceiver has a quick set mode, display set mode, timer
set mode and miscellaneous (others) set mode.
• Set mode operation
q Push [AF( SET )] momentarily to enter the set mode
menu.
w Push [F-1
QS
], [F-2
DISP
], [F-3
TIME
] or [F-4
OTH
] to enter the desired set mode.
e Push [F-1
≤
] or [F-2
≥
] to select the desired item.
r Set the desired condition using [DIAL].
•Push [F-4
DEF
] for 1 sec. to select a default condition
or value.
t Push [
Z
( MENU / GRP )] twice to exit the set mode.
[DIAL][MENU/GRP]
[AF]
[F-1]
[F-2]
[F-3] [F-4]
• Quick set mode (p. 123)
• Start up screen
• Set mode menu
• Display set mode (p. 126)
• Time set mode (p. 119)
• Miscellaneous (others) set mode (p. 130)
Push
[AF]
momentarily
■ Set mode description
12
13