Icom IC-7000 - D Memory Clearing Using the Memory Channel List; Memory Clearing

108
8
MEMORY OPERATION
8
q Select the menu
M
- 2
.
w Push [F-4
V/M
] to select memory mode.
e Push [F-1] (
MEM
,
LST
) twice to enter the memory
channel list.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] to select the memory channel to be
cleared (blanked).
y Push [F-3
MCL
] for 1 sec. to clear the contents.
u Push [
Z
(
MENU / GRP )] twice to exit the memory
channel list.
MCL
Push for
1 sec.
Programmed frequency
and operating mode
disappear.
[MENU/GRP]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-1] [F-3] [F-4]
D Memory clearing using the memory channel list
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select the menu
M
- 2
.
w Push [F-4
V/M
] momentarily to select the memory
mode.
e Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
r Rotate [M-ch] to select the memory channel to be
cleared.
t Push [F-3
MCL
] for 1 sec. to clear the contents.
•The programmed frequency and operating mode dis-
appear and “”appears.
y To return to VFO mode, push [F-4
V/M
] again.
Push for
1 sec.
MCL
[MENU/GRP] [F-3]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
■ Memory clearing