Icom IC-7000 Instruction Manual

61
4
RECEIVE AND TRANSMIT
By monitoring a signal that is being transmitted on a
repeater input frequency, you can determine the tone
frequency necessary to access a repeater.
qDuring tone squelch, DTCS squelch or repeater
operation (“ ,” “ ” or “ ” is dis-
played), select
M
- 3
.
w Push [F-3
TON
] for 1 sec. to enter the FM tone set
mode.
e Push [F-2
SCN
] to toggle the tone scan operation
ON and OFF.
•When a matched tone or code is detected, tone scan
automatically stops, the matched tone or code is dis-
played and the tone or code setting is automatically ad-
justed accordingly.
r Push [
Z
( MENU / GRP )] to exit the FM tone set mode.
[MENU/GRP] [F-2] [F-3]
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
- 3
.
D Tone scan operation
During tone squelch operation. During DTCS squelch operation. During repeater operation.

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm