Icom IC-7000 - Clock and Timers; Time Set Mode

12
119
CLOCK AND TIMERS
This transceiver has a built-in 24-hour clock with
power-off timer function. The clock indication is always
displayed except after pushing [F-INP/ENT] (HM-151).
• Set mode operation
q Push [AF( SET )] momentarily to enter the set mode
menu.
w Push [F-3
TIME
] to enter the time set mode.
e Push [F-1
≤
] or [F-2
≥
] to select the desired item.
r Rotate [DIAL] to set or select the desired value or
condition.
•Push [F-4
DEF
] for 1 sec. to select a default value or
condition.
t Push [
Z
( MENU / GRP )] twice to exit the set mode.
[DIAL][MENU/GRP]
[AF]
[F-1]
[F-2]
[F-3] [F-4]
■ Time set mode
CLOCK2 Offset
This item sets the desired off-set time period for the
clock 2 indication within –24:00 to +24:00 in 5 min.
steps.
•Push [F-4
DEF
] for 1 sec. to set the default value.
± 0:00
(default)
+ 9:00
Rotate [DIAL] to set the
time.
Time (Now)
This item sets the current time for the built-in 24-hour
clock.
15:00
Rotate [DIAL], then push [F-3
SET
] to set the time.
CLOCK2 Function
This item turns the second clock indication ON and
OFF instead of 1st clock.
The clock 2 is convenient to indicate the UTC and
other country’s local time, etc.
•Push [F-4
DEF
] for 1 sec. to set the default value.
ON
The clock 2 is displayed in-
stead of the 1st clock indica-
tion.
OFF
The clock 2 does not dis-
play. (default)
Auto Power OFF
This item sets the power-off period for automatic shut-
down after the power-on timer has turned power ON.
60min
Push [F-3
SET
] to enter the time.
Year
This item sets the current year.
2005
Rotate [DIAL], then push [F-3
SET
] to set the year.
Date
This item sets the current date.
3-15(Tue)
Rotate [DIAL], then push [F-3
SET
] to set the date.