87
6
FUNCTIONS FOR TRANSMIT
D Full break-in operation
D Semi break-in operation
■ Break-in function
During semi break-in operation, the transceiver se-
lects transmit when keying, then automatically returns
to receive after a pre-set time from when you stop
keying.
• Semi break-in operation
q Push [MODE] to select CW or CW-R mode.
w Select
M
-
3
.
e Push [F-1
BRK
] once or twice to turn the semi
break-in function ON.
• “”appears.
When using a paddle, set “
Key Speed
” in the
quick set mode to adjust the keying speed. (p. 124)
• Break-in delay setting
q Push [MODE] to select CW or CW-R mode.
w Select
M
-
3
.
e Push [F-1
BRK
] for 1 sec. to enter the break-in
delay time set mode.
r Rotate [DIAL] to set the break-in delay time (the
delay from transmit to receive).
[MENU/GRP] [F-1]
Appears
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
During full break-in operation, the transceiver auto-
matically switches to receive between keying dots
and dashes so that the operator can hear activity on
the channel when transmitting.
q Push [MODE] to select CW or CW-R mode.
w Select
M
-
3
.
e Push [F-1
BRK
] once or twice to turn the semi
break-in function ON.
• “”appears.
When using a paddle, set “
Key Speed
” in the
quick set mode to adjust the keying speed. (p. 124)
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
The break-in function is used in CW mode to automat-
ically switch the transceiver between transmit and re-
ceive when keying. The IC-7000 is capable for full
break-in or semi break-in.
To Next Page
Loading...
