■ Basic transmit operation
D Transmitting
37
3
BASIC OPERATION
q Push [PTT] (microphone) to transmit.
• [TX] indicator lights red.
w Release [PTT] (microphone) to return to receive.
Before transmitting, monitor your selected op-
erating frequency to make sure transmitting
won’t cause interference to other stations on
the same frequency. It’s good Amateur practice
to listen first, and then, even if nothing is heard,
ask “is the frequency in use” once or twice, be-
fore you begin operating on that frequency.
D Microphone lock function
This function locks microphone keypads.
➥ Push [SPCH/LOCK] (microphone) for 1 sec. to
toggle the microphone lock function ON and OFF.
• “MIC LOCK ON” and “MIC LOCK OFF,” popup indica-
tors appear, respectively
• [PTT] and [SPCH/LOCK] can be used.
• All keys on the transceiver can be used.
■ Lock functions
The dial lock function prevents accidental change
caused by [DIAL].
➥ Push [SPCH/LOCK] for 1 sec. to turn the dial lock
function ON and OFF.
•“ ” indicator appears while the dial lock function is
activated.
D Dial lock function
The lock function can only be activated when display-
ing frequency, not in set mode, memory channel list-
ing, or TV display.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
