Icom IC-7200

8
!6 Select “Install from a list or specific location
(Advanced),” then click [Next>].
Click
Select
!7 Select “Search for the best driver in these locations.”
then select “Include this location in the search:”,
and click [Browse].
Click
Select
Select
!8 Select the “Win” folder, then click [OK].
• The folder construction: “7200UsbDrv_v100” ➞
“Driver” ➞ “Win”
Click
Select
!9 Click [Next>].
Click
@0 The Wizard starts searching for the driver and
shows the dialogue below during search.
@1 After the driver is found, the “Hardware Installation”
dialogue box appears as below.
Click [Continue Anyway] to start the installation.
Click
@2 Windows starts installing the USB driver.
@3 After the installation is completed, click [Finish].
Click
@4 After clicking [Finish], the dialogue appears as below.
• Restarting the PC is recommended.
Windows XP (Continued)
DRIVER INSTALLATION