RTTY Menu
• The transceiver has a number of convenient functions for the RTTY
operation that can be accessed from the RTTY menu
.
– RTTY Filter
This item sets the RTTY filter width. 250, 300, 350, 500
Hz and 1 kHz can be selected.
• When the RTTY filter is turned ON, the RTTY tuning meter can
be used.
– RTTY Decoder
The transceiver has an RTTY decoder for Baudot
(mark freq.: 2125 Hz, shift freq.: 170 Hz, 45 bps).
• An external terminal unit (TU) or terminal node connector (TNC)
is not necessary for receiving a Baudot signal.
– RTTY Set Mode
used to set the mark and shift frequencies, keying
type, decode USOS function, etc.
To Next Page
Loading...
