Contest Number Set Mode
• This menu is used to set the contest (serial) number and count up
trigger, etc.
1. Number Style This item sets the numbering system used for contact
(serial) numbers— normal or Morse cut numbers.
– NORMAL: Does not use morse cut number (default)
– 190 ANO: Sets 1 as A, 9 as N and 0 as O.
– 190 ANT: Sets 1 as A, 9 as N and 0 as T.
– 90 NO: Sets 9 as N and 0 as O.
– 90 NT : Sets 9 as N and 0 as T.
2. Count Up Trig This item sets the count up trigger channel.
– M1, M2, M3 and M4 can be set.
3. Present Number This item shows the current number for the count
up trigger channel set above.
– Rotate the tuning dial to change the number, or push for 1 sec. to reset the current
number to 001.
To Next Page
Loading...
