KEYPAD
• Pushing a key selects the operating band.
– [GENE] selects the general coverage band.
– Pushing the same key 2 or 3 times calls up other stacked frequencies in the
band.
•ICOM's triple band stacking register memorizes 3 frequencies in each band.
– After pushing [F-INP], enters a keyed frequency.
• Pushing [144 ENT] is necessary at the end.
• e.g. to enter 14.195 MHz, push [F-INP] [1] [4] [•] [1] [9] [5] [144 ENT].
To Next Page
