Antenna Outputs Indicator
• Indicates which antenna connector is use for HF/50 MHz.
• The IC-746PRO has 2 antenna connectors for the HF/50 MHz bands, [ANT1]
and [ANT2], and 1 antenna connector for the 144 MHz band; a total of 3
antenna connectors.
– Antenna Selections:
• For each operating band the IC-746PRO covers, there is a band memory which
can memorize a selected antenna. When you change the operating frequency
beyond a band, the previously used antenna is automatically selected (see
below) for the new band. This function is convenient when you use 2 antennas
for HF and 50 MHz bands operation.
To Next Page
Loading...
