Need help?Do you have a question about the Icom IC-756 and is the answer not in the manual?
General| Antenna Impedance | 50 ohms |
|---|---|
| Power Supply Requirement | 13.8 V DC ±15% |
| Frequency Range | 0.03-60 MHz |
| Modes | SSB, CW, RTTY, AM, FM |
| RF Output Power | 100W (SSB/CW/FM), 40W (AM) |
| Receiver Type | Superheterodyne |
| Intermediate Frequencies | 64.455 MHz/455 kHz |
| Sensitivity | SSB/CW: 0.16 μV |
| Selectivity | SSB: 2.4 kHz/-6 dB |
| Current Consumption | 2.0 A (Receive), 20 A (Transmit) |
To Next Page
