Icom IC-756PRO - Page 8

RX Receiver
- Set radio to follows
- Frequency: 14.1015MHz
- Mode: USB
- Shift: 0
- Filter 2.4KHz
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Receive
- Adjust L111, L112 and L113 for maximum level
RX Total Gain
- Set radio to follows
- Frequency: 14.1015MHz
- P AMP: OFF
- Mode: USB
- Shift: 0
- Filter 2.4KHz
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Apply 14.1015MHz/54dBu signals to ANT connector
- Apply no signals to ANT connector
- Adjust R210 for 30dB between with signals and without signals