Icom IC-7851 - Page 25

3-12
ADJUSTMENT OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
-ADJUSTMENT- 13 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 10W” is displayed.
[POWER HF 5W]
5 W
14 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 25W” is displayed.
[POWER HF 10W]
10 W
15 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 50W” is displayed.
[POWER HF 25W]
25 W
16 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 100W” is displayed.
[POWER HF 50W]
50 W
17 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 150W” is displayed.
[POWER HF 100W]
100 W
18 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER HF 200W” is displayed.
[POWER HF 150W]
150 W
19 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER AM Ratio HF” is displayed.
[POWER HF 200W]
200 W
AM CARRIER
POWER RATIO
(HF)
20 1) Push [F-7].
• “POWER HF 5W” is displayed.
2) Turn the main dial to adjust the TX output power.
3) Push [F-7].
• “POWER 50M SET” is displayed.
[POWER AM Ratio HF]
50 W
TX POWER SET
(50 MHz)
21 1) Push [F-7].
• “POWER 50M 5W” is displayed.
2) Turn the main dial to adjust the TX output power.
3) Push [F-7].
• “POWER 50M 10W” is displayed.
[POWER 50M 5W]
5 W
22 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 50M 25W” is displayed.
[POWER 50M 10W]
10 W
23 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 50M 50W” is displayed.
[POWER 50M 25W]
25 W
24 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 50M 100W” is displayed.
[POWER 50M 50W]
50 W
25 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 50M 150W” is displayed.
[POWER 50M 100W]
100 W
26 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 50M 200W” is displayed.
[POWER 50M 150W]
150 W
27 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER AM Ratio 50M” is displayed.
[POWER 50M 200W]
200 W
AM CARRIER
POWER RATIO
(50 MHz)
28 1) Push [F-7].
2) Turn the main dial to adjust the TX output power.
3) Push [F-7].
• “POWER BAND BALANCE SET” is displayed.
[POWER AM Ratio
50M]
50 W
3-6 TX ADJUSTMENTS (continued)