Icom IC-7851 - Page 26

3-13
3-6 TX ADJUSTMENTS (continued)
ADJUSTMENT OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
TX POWER BAND
BALANCE
29 1) Push [F-7].
• “POWER 1.8M 200W” is displayed.
2) Turn the main dial to adjust the TX output power.
3) Push [F-7].
• “POWER 3.5M 200W” is displayed.
[POWER 1.8M 200W]
200 W
30 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 5.3M 200W” is displayed.
[POWER 3.5M 200W]
200 W
31 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 7M 200W” is displayed.
[POWER 5.3M 200W]
200 W
32 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 10M 200W” is displayed.
[POWER 7M 200W]
200 W
33 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 18M 200W” is displayed.
[POWER 10M 200W]
200 W
34 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 21M 200W” is displayed.
[POWER 18M 200W]
200 W
35 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 24M 200W” is displayed.
[POWER 21M 200W]
200 W
36 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 28M 200W” is displayed.
[POWER 24M 200W]
200 W
37 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 52M 200W” is displayed.
[POWER 28M 200W]
200 W
38 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “POWER 54M 200W” is displayed.
[POWER 52M 200W]
200 W
39 1) Turn the main dial to adjust the TX output power.
2) Push [F-7].
• “ALC” is displayed.
[POWER 54M 200W]
200 W
ALC METER 40 • Push [F-7].
• “DRIVE” is displayed.
[ALC]
Push [F-7].
DRIVE LEVEL 41 • Push [F-7].
• “SWR1” is displayed.
[DRIVE]
Push [F-7].
SWR1 42 • Push [F-7].
• “SWR2” is displayed.
[SWR1]
Push [F-7].
SWR2 43 • Push [F-7].
• “ID-APC” is displayed.
[SWR2]
Push [F-7].
ID-APC
ACTIVATION
POINT
44 • Push [F-7].
• Returns to the TX adjustment menu.
[ID-APC]
Push [F-7].
45 • Push [F-7].
• Returns to the main adjustment menu.
–
Push [F-7].