SECTION 4 UT-121 UNINSTALLATION
4 - 1
2 screws
Unit cover
UT-121
(Top view)
Notches
Tweezers
q
Turn the power OFF, and remove the battery pack.
w
Unscrew 2 screws to remove the unit cover.
e
Insert the tweezers into the notches of the UT-121, and remove it as shown below.
r
Screw 2 screws to assemble the unit cover.
2 screws
Unit cover
RECOMMENDATION:
Critical technique is necessary for the UT-121 uninstallation, therefore, we recommend you to uninstall it at your
dealer or service center.
To Next Page
Loading...
Need help?
General
