MDC 1200 SYSTEM OPERATION
3
D Receiving an Emergency Call
q When an emergency call is received:
Beeps sound.•
The calling station ID (or alias) and “• EMG EMG” are al-
ternately displayed.
The operation of the backlight depends on the Back-•
light setting in the User set mode. When “LIGHT AUT”
or “LIGHT AU2” is selected, the backlight turns ON for a
set time period*.
w When the Send Ack function is turned ON, the transceiver
automatically transmits an acknowledgement to the calling
station.
e Turn power OFF or change the channel to stop the beep
and the display indication.
D Receiving a Stun or Revive Call
If a Stun call is received that matches your station ID, the
transceiver will display a stun text and you can not receive or
transmit. If a Revive call that matches your station ID is re-
ceived, or you enter the password*, the transceiver will be
revived.
When the transceiver is stunned.•
(The Stun text depends on the presetting.)
When you want to revive the stunned transceiver by entering
a password, read the following instructions.
Turn OFF the stunned transceiver once and then turn it q
ON again.
The illustration above is still displayed. Enter the required w
password.
When you enter a correct password, the transceiver will e
be revived and the screen will return to normal.
* Depending on the presetting. Ask your dealer for details.
To Next Page
Loading...
