12
4
PROGRAMMABLE FUNCTIONS
‘‘
General
In the following explanations, programmable function names are
bracketed, the specific switch used to activate the function depends
on programming.
DD
KEY LOCK FUNCTION1/2
This function locks access to all programmable switches (except
the switch assigned for the lock function):
Lock1: All Key Lock (except Lock key).
Lock2: Channel select switch Lock.
Push and hold the [Lock1] or [Lock2] switch for 1 sec. to toggle the
lock function ON and OFF.
• This function may be inhibited on some channels.
DD
PRIORITY CHANNEL
This function is used to select a pre-programmed channel at the
push of a switch.
Push the [PrioA], [PrioA(Rewrite)] or [PrioB] switch to select the pri-
ority channel.
• Priority channel is automatically selected.
IC-F21_1 IM 01.11.13 2:02 PM Page 17 (1,1)
To Next Page
Loading...
