18
3
BIIS OPERATION
n Receiving a message
ï Receiving a status message
q When a status message is received;
• Beeps sound.
• The calling station ID (or text) and the status message is dis-
played alternately when the indication mode is 1 line, depending
on the setting.
R X S t a t u s 0 1
B A S E
w Push [P4] (Moni(Audi)) to return to the standby condition.
NOTE: Only the calling station ID (or text) is displayed (no
message is displayed alternately) when the scroll timer is
set to ‘OFF.’ In this case, push [Status Up]/[Status Down]
to display the status message manually.
ï Receiving an SDM (Short Data Message)
q When an SDM is received;
• Beeps sound.
• The calling station ID (or text) and the SDM is displayed alter-
nately when the indication mode is 1 line, depending on the set-
ting.
• “ ” appears.
w When the received SDM includes more than 12 characters,
the message scrolls automatically, when the automatic
scroll function is activated.
• Push [Status Up]/[Status Down] to scroll the message manually.
S D M 1 2 3 4 5 6 7 8
B A S E
e Push [P4] (Moni(Audi)) to return to the standby condition.
To Next Page
Loading...
