Icom IC-F25SR - LED Indicator

7
2
PANEL DESCRIPTION
‘‘
LED indicator
The LED indicator indicates the information as
follows;
(Ref.; R=Red, G=Green, O=Orange)
R R R R
O O
G G G G
G G
G
G G
R R
R (O)*
• TX: Turns Red while transmitting a signal.
• RX: Turns Green while receiving a signal.
• Call LED (Blink): Transmitting or receiving the Smart-Ring.
• Auto/Find scan: Blinks while Auto/Find scan is activated.
• Low BATT1: You should charge the battery. (blinks slowly)
• Low BATT2: You must charge the battery. (blinks fast)
• TX low BATT1: Low BATT1 was detected during TX mode.
• TX low BATT2: Low BATT2 was detected during TX mode.
* During the alkaline battery operation.
!IC-F25SR-0.qxd 06.10.5 6:31 PM Page 7 (1,1)