Need help?Do you have a question about the Icom IC-F221 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Power Output | 25W |
| Dimensions | 150(W) x 40(H) x 126.5(D) mm |
| Weight | 1.5 kg |
| Mode | FM |
| RF Power Output | 25W |
| Channel Spacing | 12.5/25 kHz |
Details the controls and indicators on the front panel of the transceiver.
Explains the various symbols and information displayed on the transceiver's screen.
Describes the functions that can be assigned to the programmable keys.
Steps and considerations for powering the transceiver on.
Methods for selecting operating channels based on system type.
Procedures for receiving calls and transmitting messages.
How to select transmit code channels and codes.
Instructions for transmitting DTMF codes.
How to turn the voice scrambler function ON and OFF.
How to enter and customize transceiver settings via User Set Mode.
Diagram and explanation of rear panel connections for power, speaker, and antenna.
Lists and describes the accessories included with the transceiver.
Instructions and diagrams for mounting the transceiver using the bracket.
Steps for installing the optional UT-108 unit.
Steps for installing the optional UT-109 or UT-110 scrambler units.
Instructions for installing the optional OPC-617 accessory cable.
Importance of the antenna and consulting the dealer for selection.
Procedure for replacing blown fuses in the DC power cable.
Method for cleaning the transceiver using a soft, dry cloth.
To Next Page
